Mechanical, electrical, plumbing and lighting under one roof — a single responsible team from concept drawings to final commissioning.
Our technical team solves non-standard project challenges with custom-designed systems, panels and control architecture.
Official partnerships with Siemens, ABB, OSRAM, LEDVANCE, Emerson and more guarantee genuine equipment with factory warranty.
8+ years and 500+ completed projects across aviation, utilities, retail and hospitality — built to perform for decades.
LaVista supplied and installed the apron lighting at Kutaisi International Airport — covering both the newly constructed aprons and the existing ones. The work included equipment supply, installation and commissioning across the airfield.
Apron lighting is among the most demanding outdoor lighting disciplines: uniformity, glare control for pilots and ground crews, and strict aviation standards must all be met simultaneously. Our team engineered the system to satisfy these requirements across the old and new sides of the airfield.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16At Georgia’s main international gateway, LaVista delivered the largest apron lighting project in the country — illuminating the aircraft stands that keep the nation’s busiest airport operating around the clock.
Beyond the apron, our team also executed the complete runway lighting system, including the inset lights embedded in the runway surface itself. Airfield ground lighting is aviation’s most safety-critical discipline, governed by strict international standards for intensity, alignment and reliability — and it is now part of LaVista’s proven track record.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16A utility-scale SCADA dispatch system covering 37 step-down substations and approximately 2,500 transformer substations across the capital’s distribution network.
The deployment gives dispatchers real-time supervisory control over the network — one of the most significant automation projects in Georgia’s energy distribution sector.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16Lighting and electrical engineering for the Westring warehouse facility in Tbilisi — designed for the realities of logistics: high racking, long aisles and round-the-clock operation.
Warehouse lighting is an efficiency problem as much as a visual one: high-bay fixtures, uniform aisle illuminance and sensible controls cut energy costs while keeping picking and loading zones safe.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16A complete fit-out package for the Check-in travel office in Tbilisi: LaVista delivered the full electrical installation, the lighting system, and the security infrastructure including CCTV cameras.
Office projects like this showcase the advantage of a single contractor — power, lighting and low-current security systems designed and installed as one coordinated package, with no gaps between trades.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16A full-cycle lighting project for Alta’s flagship locations: LaVista carried out the complete lighting design, supplied the equipment, and performed the installation at Alta City Mall Saburtalo and Alta City Mall Gldani.
Design, supply and installation in one hand means the photometric concept survives all the way to the finished ceiling — no compromises between what was designed and what gets built.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16LaVista supplied the luminaires for the Gorgia store — one of Georgia’s leading construction and home-improvement retail chains.
Big-box retail lighting has to work hard: high mounting heights, long operating hours and demanding vertical illuminance on racking. Through our authorized brand partnerships, we specified and supplied fixtures matched to exactly these conditions.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16LaVista has launched a scheduled electrical panel replacement program across the Alta retail network, modernizing the power distribution infrastructure behind one of Georgia’s best-known electronics chains.
The program follows a detailed project schedule developed by our engineering team, with works phased store by store to keep every location trading normally. Replacement works are sequenced around opening hours, with night and early-morning shifts handling the switchover stages.
Distribution panels are the heart of a building’s electrical system. As retail loads grow — more displays, more IT, more climate equipment — aging panels become both a reliability risk and a safety concern. Modern switchgear brings better protection coordination, cleaner load management and room for future expansion.
The new assemblies are built around components from our authorized partner brands, giving Alta genuine equipment with factory warranty and long-term spare-part availability.
The program continues through the coming months. For technical inquiries about panel manufacturing and replacement projects, contact our team at info@lavista.ge.
A new SCADA system has gone live at the Telasi dispatch center, giving the capital’s electricity distributor real-time supervisory control over 37 step-down substations and approximately 2,500 transformer substations.
The launch marks one of the most significant automation milestones in Georgia’s energy distribution sector. Dispatchers now monitor and control the network from a modern control room, with live telemetry replacing manual reporting chains that once took minutes or hours.
With supervisory control in place, faults are located faster, switching operations are executed remotely and safely, and the distribution company gains the data foundation for future smart-grid development across Tbilisi.
LaVista’s scope covered system integration and operator readiness, continuing our track record in mission-critical infrastructure for Georgia’s utilities sector.
LaVista enters 2026 with an expanded portfolio of authorized brand partnerships — the foundation that lets us guarantee genuine equipment, factory warranties and manufacturer-backed support on every project.
Our partner network spans the full scope of electrical and lighting engineering: Siemens and ABB for switchgear and automation, Emerson and Mitsubishi Electric for industrial automation, LEDVANCE, OSRAM and Siteco for lighting, COPA-DATA for SCADA software, WAGO for connection technology, and Timkabel and Helukabel for cables.
Authorized partnership is more than a logo on a website. It means direct procurement channels without grey-market risk, access to manufacturer technical support and training, and warranty terms that hold up years after handover.
For procurement inquiries or partner-brand specifications, our engineering team is available at info@lavista.ge.
A building’s night identity is designed, not accidental. LaVista delivers façade illumination as a complete discipline — from the first photometric concept and fixture aiming studies to control programming and final scene tuning on site.
We work with dynamic RGBW and tunable-white systems, wall-washing and grazing optics, and DMX/DALI control architecture — engineered so the building looks as intended every single night, for years.
Lighting concept, calculation and visualization — agreed before a single fixture is ordered.
Genuine fixtures through our authorized partner brands, installed by our own teams.
Control scenes programmed, aimed and tuned at night, on site, until it’s right.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16From distribution panels to airport runways, electrical infrastructure is LaVista’s core discipline. We design, supply, install and commission complete power systems — low and medium voltage, indoor and out.
Our own panel manufacturing capability and authorized partnerships with Siemens, ABB, WAGO and Helukabel mean the switchgear we install is genuine, warrantied and built to our drawings.
Load calculations, single-line diagrams and panel schedules engineered in-house.
Panels assembled with authorized partner components; site works by our own crews.
Full testing, documentation and handover — including client training.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16When a building — or an entire distribution network — needs to be visible and controllable from one screen, that’s our territory. LaVista delivers building management systems and utility-scale SCADA, from sensor level to control room.
Our reference work includes the dispatch automation system covering 37 step-down substations and roughly 2,500 transformer substations for the capital’s electricity distributor — proof that we operate comfortably at infrastructure scale.
Points lists, network design and controller selection matched to the facility.
Field devices, controllers and supervisory software brought onto one platform.
Operators trained, documentation delivered, support agreed.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16Life-safety systems are the one part of a building that must work flawlessly on the worst day. LaVista designs and installs fire detection and alarm systems alongside the full low-current scope — CCTV, access control and security.
Equipment comes through our authorized partnerships — including Siemens for detection — installed and commissioned to the standards these systems demand.
Detection and alarm layout designed to the building’s real risk profile and codes.
Genuine certified equipment, installed and wired by trained teams.
Cause-and-effect testing, handover documentation and after-service.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16Good lighting is calculated, not guessed. LaVista’s lighting design service covers interior, façade and landscape projects — with photometric calculations, visualizations and complete fixture specifications delivered as proper engineering documentation.
Because we also supply and install, our designs stay buildable and on budget: every fixture we specify is one we can actually procure through authorized channels and stand behind after handover.
Spaces, tasks and atmosphere defined together with the architect and client.
Photometric modelling, uniformity and glare checks, energy and emergency compliance.
Fixture schedules, control intent and documentation ready for procurement.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16Ventilation, heating and cooling engineered alongside the electrical design from day one — so mechanical loads, panel schedules and controls are coordinated instead of colliding on site.
From retail floors to office fit-outs, we size, select and install HVAC systems that meet comfort requirements without oversized plant or wasted energy.
Heating and cooling loads, fresh-air rates and zoning defined for the building.
Equipment selection, duct and pipe routing coordinated with all other trades.
Installation, airflow balancing and commissioning with documentation.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16Water supply and drainage engineering as part of the complete building services package — designed, installed and tested by the same team that handles your electrical and mechanical scope.
Coordinated pipe routing matters more than it sounds: clashes between plumbing, ducting and cable containment are the classic source of site delays, and single-team delivery eliminates them at the drawing stage.
Supply and drainage schemes, pressure calculations and fixture schedules.
Routing coordinated with HVAC and electrical; clean, accessible installations.
Pressure tests, flow verification and handover documentation.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16LaVista assembles distribution panels, control panels and industrial cabinets in-house — built to our own engineering drawings with components from authorized partners including Siemens, ABB, WAGO, Timkabel and Helukabel.
In-house manufacturing means short lead times, full control over quality, and panels that arrive on site tested, labelled and documented — ready to install rather than ready to troubleshoot.
Single-line diagrams, layouts and component schedules prepared in-house.
Built with genuine authorized-partner components, wired to standard.
Factory-tested, labelled and documented before dispatch to site.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16Electrical and lighting engineering works at the Akhalkalaki hydro power plant — infrastructure where reliability is measured in years of uninterrupted operation.
Power generation facilities combine harsh industrial conditions with zero tolerance for downtime: equipment selection, protection coordination and installation quality all have to perform around the clock, season after season.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16Lighting and electrical works at East Point — one of Tbilisi’s largest shopping and entertainment destinations.
Retail environments demand lighting that sells — high color rendering, comfortable vertical illuminance and energy-efficient operation across long opening hours.
Send us the drawings — we'll respond with a scoped technical proposal.
Get in TouchCall +995 577 38 16 16